TNP Home Theater Speaker Wall Plate Outlet - 7.1 Surround Sound Audio Distribution Panel, Gold Plated Copper Banana Plug Binding Coupler, RCA LFE Jack for Subwoofer, HDMI 4K ARC/eARC Full HD (3-Gang)

My only complaint is that it wasn't available in black as it's in a dark walled home theater. However, it's behind the receiver so it's not real visible. It worked as expected and definitely kept the wiring neater and allowed me to run it through the walls.

This is a must-have for in-wall wiring of your surround. I chose this one because I installed a 7.2 system with gold-plated jacks and it worked out great. You can get almost any combination of HDMI, subs/surrounds that you need (5.1, 5.2, 7.1, 7.2 etc). Do your planning on location and wire-routing; get good quality speaker wire and HDMI (high-speed with Audio Return Channel); get the remod-style mounting bracket/box then cut your hole at the same height/level as your electrical outlets and preferably between the same studs as your TV's wire-box so your HDMIs just run straight up to the TV (remember to install the bracket BEFORE you run your wires). When connecting the wires to these terminals, it's best to have 10 to 12 inches of wire coming out of the wall because you need space for your hands to manipulate the wires and nuts on the terminals. If you have a basement with access to the floor below the mounting location, it's best to drill 4 half-inch holes straight up through the bottom plate of the wall and feed your wires up those holes. Tip: If your TV and Surround Receiver are fully compatible you really only need 1 HDMI port on the wall plate, because you can plug your devices into the receiver and just sent the A/V/data to the TV while the audio is returned over the same HDMI.

It looks cheap and feels cheap

Would have liked to use keystone inserts but this was a good alternative for the cost. Just 1 set of keystone for speakers where $10 bucks and I was able to use coax blanks and the speaker inserts from this at a 3rd of the cost.

Great Wall plate.looks and works as described. I use it with 3D HDMI and works perfectly. There are multiple configurations to fit every need. BE VERY SURE of what you want before purchasing. THERE IS A RETURN FEE. I ordered the wrong one and had to pay $6.47 to return them. I did not deduct stars because it was my fault

Seeing all the good reviews about this brand , I went ahead and bought one their speaker wall plates, that was advertised as gold-plated. The product that I received, as you can see in the picture, was rusted and ugly upon arrival. Thus, a very low quality product. Will return.

Better then I thought. I would buy another if I needed to. Everything is good, no problem hooking it up. Received 1 day later then told but that was because of the snow storm we had. Other then that, no problems.

Bought this for a new 7.1 surround sound install. Connectors strip when tightening (I'm not over tightening, I've done many speaker installs) causing a lose connection. Three of them spin freely and do not make solid connections.UPDATE: After leaving a poor review a replacement unit was shipped to me. I only replaced the Left outlet box that had the spinning connectors. Works like a charm and all of my speakers connected first try with no static or distortion.I also learned (after removing the defective outlet) that if you remove the wire and hand tighten the spinning post it will fully tighten. Then back out just enough and retighten on the wire and it will work without spinning. Thanks TNP