VonHaus Ultra Slim TV Wall Mount for 15-42 inch LCD LED 3D Plasma TVs Super Strong 88lbs Weight Capacity (05/022)

This is super easy to install. It comes with all the bolts you could need, and you don't even have to mount it to studs! The kit comes with 4 (or so) different kinds of bolts for the brackets that mount into your tv(apparently different tv's have different sizes). It also comes with 8 or 9 washers. 4 of the washers have a smaller hole in the middle than the rest. All you have to do is lay the vertical bracket on the holes on the back of your tv, put the washers on the bolts, and tighten them in (you'll need a socket set for this, also, I had to add an extra washer to each bolt so I could tighten it down enough. DON'T over tighten!). As far as mounting the plate onto the wall, if you have studs where you're mounting your tv, all you have to do is drive the self tapping screws through the bracket and into the studs. If you don't have studs where you're mounting your tv, the kit comes with drywall anchors that you push into a hole that you drill out in the wall, and from there you'd just install the wall bracket like normal, except you'd screw the bolts into the anchors in the wall. Once you have all the brackets mounted ( two on the tv and one on the wall) it's just a matter of setting the tv onto the wall bracket. It's fairly easy. This worked great with my 32 inch tv using the drywall anchors. I had no issues installing it and it only took about 30 minutes. The image attached shows the tv mounted and all wired up, the wires are ugly in the picture, but I recently bought a wire cover that hides the wires and makes everything look neat (The wire cover I have now is from best buy, I got it for 16$ on sale). Overall, I'd say you should buy this if you're in need of a tv mount. It's extremely cheap and works great.

This mount is working great for my 39" Visio TV. It was super easy to mount. The level is very convenient and helped expedite the install. It is small, so it easily hides behind the TV. My one worry with this when I made the purchase was that it doesn't have adjustable viewing angles. Your TV stays in a fixed position. After walking around the 14'X11' room, and viewing it from all distances and angles, I can see that this isn't an issue. I'm able to view the TV's display from any spot in the room.As an update, I noticed a critical review that stated that the wall mount is only for concrete walls, and that the mounting anchors are for concrete. They mentioned that the dimensions of the mount make it impossible to span across two studs, so it is impossible to mount. You've got two options available here...Option 1: Purchase drywall anchors (available at Walmart), and use those instead of the provided concrete anchors. This is what I did. I'm fairly certain my 75lbs rated drywall anchors were under $2 to purchase. I simply mounted the unit straight to the drywall with the anchors. This option should work fine for lighter TVs. Mine weighs 14 lbs, and the wall mount is holding firm. Since it is a fixed mount, it's not like you will be constantly pulling and twisting every day to adjust the viewing angle.Option 2: Stud/drywall anchor combination; find one stud, and screw your wall mount into that on one side, then use drywall anchors to attach the other side.I'm not even certain that the anchors they provide don't work on drywall. The instructions do refer to them as concrete anchors, but they look a lot like drywall anchors to me. I only bought the drywall anchors to be on the safe side.

A simple, no-frills, inexpensive wall mount. I used this to mount a 43-inch Vizio with a soundbar bracket-mounted underneath, for a total of about 26 lbs. The TV is mounted in our small home gym--so small that we didn't need anything adjustable.I put two of the included lag bolts into a stud (drilled pilot holes, of COURSE), then secured the other side with two sheet-rock anchors, purchased separately. I checked the level using my own tool; the included spirit level seemed to be accurate, but the entire bracket is so short that it's hard to visually assess the positioning using that tool alone.Seems completely secure. I'm totally satisfied with the results.

BEFORE BUYING THIS ITEM, please consider purchasing the following items also:Drywall anchors: http://www.amazon.com/TOGGLER-SnapSkru-Self-Drilling-Glass-Filled-Fastener/dp/B0051IB6OA/This item *is* compatible, with most TVs in the stated inch range, but the mounting hardware is mostly unusable. This kit is designed for OUTDOOR use as it comes with concrete wall anchors and states this in the instructions (see photo). If using the M4 screws, the included washers allow the bolt heads to slide through and not stay mounted to the vertical frames. Finally, make sure to mount one side of back frame to a stud. For most situations, it is not long enough to reach from stud - to - stud. The drywall anchors will come in handy for the side not in the stud.WITH THAT SAID, it is a very good mount. It is extremely sturdy and the price is unbeatable. As long as the necessary time and patience is taken, it will not give any problems. It is lightweight and easy to manipulate as the brackets will not stick out far from the TV. Finally, a long screwdriver is needed to adjust the bolts on the bottom as there is very little clearance between the TV and the wall.I recommend this mount but consider the caveat above.